FUEL BUND LINERS
Where chemical or fuel containment is required, we recommend the use
of a Ethylene Inter-copolymer Alloy (EIA); this is a reinforced membrane
of outstanding qualities called MRC 1500, capable of chemical containment
at high temperatures.
Also we have a membrane called “Extreme “which meets most
of the requirement criteria for fuel and chemical bund lining. Both products
can be prefabricated into large panels, allowing rapid deployment with minimal
field welds, which greatly simplifies quality assurance and meets the stringent
industry regulations.
contact us. on 0116 2629106 or via our contact form
 Effect of fluid on membraneFluid has little or no effect – Acetic acid (5%), Ammonium phosphate, Ammonium hydroxide, Ammonium sulphate, Antifreeze (ethylene glycol), Vinegar (8°), Butanone, Calcium chloride-solution, Calcium hydroxide, Chlorine solution (20%), Clorox (bleaching agent), Diesel, Ethanol, Phosphoric acid (50%), Glycerine, Hydrochloric acid HCI (50%), Hydrochloric acid HF (5%) Hydrochloric acid HF (50%), Isop ropyl alcohol, Potassium chloride, Potassium sulphate, Kerosene, Magnesium chloride, Magnesium hydroxide, Fertiliser solution, Methanol, Mineral spirits, Sodium acetate solutions, Sodium bisulphate solution, Sodium phosphate, Sodium hydroxide (60%), Nitric acid (5%), Oils: ASTM type 3, animal, vegetable, hydraulic – petroleum, corn, crude, raw linseed, SEA-30, transformer, Terpentine, Water (portable) 23°c, Water (sea) 23°c, Zink chloride, Sulphuric acid (50%) |
 |
 |
 |